Strobe goodies

Access­ories for
your Seaflash.

Practical and necessary access­ories such as cables, snoot sets and flash arms guarantee optimal use of your Seaflash flash unit – for intuitive operation and even better lighting results with normal and special flash techniques.

Already decided? Inquire here directly.

Stable
con­nec­tion.

A reliable data trans­mis­si­on between camera and flash unit is a must in under­wa­ter pho­to­gra­phy. We have therefore made it our mission to make this con­nec­tion as secure and stable as possible: Our tried and tested S6 connector system gua­ran­tees optimal per­for­mance for your flash modes, HDMI data exchange or remote use. For a flawless transfer of optical signals, we only use cables from well-known manufacturers.

The
S6 system.

Robust, easy to use and abso­lute­ly reliable: The S4, S6 or S20 socket and plug system consists of extremely resilient hard gold-plated contacts, a practical plug con­nec­tion and a 4‑way, high-quality O‑ring seal. Available in short and long versions, as a remote cable or in a special length and with an adapter.

Switch exten­si­ons

Ready for
the cold.

Espe­cial­ly on chal­len­ging dives, small details like a glove can become a big obstacle. With the switch exten­si­ons for our Seaflash strobes, you are always well equipped and can operate your device intui­tively and unrestric­ted­ly as usual.

Spare batteries

Charge
it up.

To make sure that you never run out of battery, we recommend that you always take one (or more) spare batteries with you when you travel. However, always use and maintain them together with your standard battery to avoid a memory effect. Further infor­ma­ti­on on batteries, charging and main­ten­an­ce can be found in our FAQs.

Cookie Consent with Real Cookie Banner